![]() Microsoft Windows Server 2019, Version 1903 EFI Driver: In the BIOS Controller Name as part of the Controller Handle section, a device path appears instead of an Intel adapter branding name. This does not affect egress traffic from outside of the NIC. As a workaround, disable TX VLAN offload on VFs: ethtool -K tx-vlan-offload off. This is due to issue with NIC settings and offload settings of VFs. Linux driver: VLAN tagged traffic sent from other VFs attached to NIC can be seen on other VFs. This does not effect functionality, as nvmupdate requires a reboot to be complete. FreeBSD Driver: Due to changes in the reset path, several errors are seen in dmesg when trying to re-establish link after an nvmupdate. ![]() However, flow control works fine with values set to TX=On RX=ON. Firmware: Flow control settings have no effect on traffic, and counters do not increment with flow control set to TX=ON and Rx=OFF. Firmware: When sending an AQC to start, the LLDP agent does not change the property NetworkAdapter.LldpEnabled to True. As a workaround, remove (if previously loaded) and reload irdma after changing the number of queues. ![]() Linux Driver: irdma stops working if the number of ice driver queues are changed (ethtool -L) while the irdma driver is loaded. Workaround: With OOT irdma-1.8.X installed on the system, avoid running sysctl while drivers are being loaded or unloaded. ![]() Linux Driver: Linux sysctl commands, or any automated scripting that alerts or sets /proc/sys/ attributes using sysctl, might encounter a system crash that includes irdma_net_event in the dmesg stack trace. Linux Driver: Receive hashing might not be enabled by default on Virtual Functions when using an older iavf driver in combination with a newer PF driver version. Linux Driver: A VF may incorrectly receive additional packets when trusted mode is disabled but promiscuous mode is enabled. Alternatively, if promiscuous mode is enabled and multicast promiscuous mode is disabled, then both unicast and multicast packets may not be visible on the VF interface. Linux Driver: If trusted mode is enabled for a VF while promiscuous mode is disabled and multicast promiscuous mode is enabled, unicast packets may be visible on the VF and multicast packets may not be visible on the VF. Linux Driver: When the maximum allowed number of VLAN filters are created on a trusted VF, and the VF is then set to untrusted and the VM is rebooted, the iavf driver may not load correctly in the VM and may show errors in the VM dmesg log. Linux Driver: When the queue settings of a port are modified using the ethtool -L ethx combined XX command, the Interrupt Moderation settings reset to default. Linux Driver: Repeatedly assigning a VF interface to a network namespace then deleting that namespace might result in an unexpected error message and might possibly result in a call trace on the host system. General: When a VF interface is set as 'up' and assigned to a namespace, and the namespace is then deleted, the dmesg log may show the error Failed to set LAN Tx queue context, error: ICE_ERR_PARAM followed by error codes from the ice and iavf drivers. As it pertains to HII, NVMs can still be updated via FMP. General: Due to the previous bugs in PF-to-port mapping in both NVM and UEFI Driver, old NVMs are not compatible with the new UEFI driver. Intel Gigabit ET Quad Port Mezzanine Card Intel Gigabit ET2 Quad Port Server Adapter Intel Gigabit ET Quad Port Server Adapter Intel 82576 Gigabit Dual Port Server Network Connection Intel Gigabit EF Dual Port Server Adapter Intel 82576NS SerDes Gigabit Ethernet Controller Intel 82576NS Gigabit Network Connection Intel 82576NS Gigabit Ethernet Controller Intel Gigabit ET Dual Port Server Adapter Intel 82576 Gigabit Dual Port Network Connection Intel 82583V Gigabit Network Connection Intel 82574L Gigabit Network Connection Intel 82575EB Multi-Function Network Device Intel Gigabit VT Quad Port Server Adapter Intel 82575EB Gigabit Backplane Connection Intel 82575EB Gigabit Network Connection Removed the Microsoft Windows e1q driver from the download package and install media. These boot images cannot be loaded or configured. End of support for Legacy iSCSI Boot and CLP boot images. On Intel Ethernet 810 Series devices: Support for Microsoft Windows 11 for 10Gbps and 25Gbps devices based on the following controllers: Intel Ethernet Controller E810-C or Intel Ethernet Controller E810-XXV. ![]() Support for Intel Ethernet cmdlets on Intel Ethernet 700 Series and 820 Series devices, on supported Microsoft Windows Server operating systems ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |